ADVISORY: DUE TO LUDICROUS SHIPPING COSTS CURRENTLY BEING CHARGED FOR GLOBAL SHIPPING, STOCK IS LOW ON THIS ITEM AND REPLENISHMENT WILL AWAIT A GENERAL DECREASE IN SHIPPING RATES. IF YOU NEED A QUANTITY EXCEEDING 10K RIVET SETS, ASK ME DIRECTLY ABOUT A SPECIAL ORDER. The price of this item will also temporarily be increased to $49 from $29 per 1k.
PLEASE NOTE: THIS PRODUCT IS FOR INSTALLERS ONLY. IF YOU WANT THIS ITEM ADDED TO A PRODUCT LAGARTO IS BUILDING FOR YOU, CHOOSE THIS PRODUCT INSTEAD.
These single cap rivets are made of steel, with nickel plating. Package of 1000 caps, 1000 posts.
I've been a leathercrafter for 12 years, and became very frustrated with Tandy leather Factory "rapid rivets" (the ones with a finished cap on one end and an unfinished tube on the other). First, they stopped pinching the tubes, so the caps fall off far too easily before setting. Then, they reduced the quantity they sell to bags of 100. Since I was going through 1000+ of these a month, I sourced my own direct from a manufacturer.
Nickel plated steel Single Cap Rapid Rivets functionally identical (and actually improved) to those sold by Tandy Leather Factory Item #1275-12 in their "LARGE" length. Fits Tandy press and dies with the medium size rivet cups, or hand setters. For best results, use the press, as hand setting long rivets through material thinner than 9mm or 3/8" will often cause them to mis-set and bend the posts to one side.
I buy these in bulk (100,000 sets) and repackage them by weight, not quantity. You'll receive 1000 minimum pieces of each caps and posts, as I add a few extra grams to the bundles to be sure. I have used these same parts for my own leathercraft in a Tandy press, they work better than Tandy's if not the same.
Your rivets will come packaged exactly as you see in the photo - heavy 4mil bag with an internal zipper bag to keep the caps separate from the posts.
If you are not 100% satisfied with the quality of these rivets, you may return them for a full refund, even if you have used up to 50 sets. Shipping charges, however, will not be refunded.
PLEASE NOTE: THIS PRODUCT IS FOR INSTALLERS ONLY. IF YOU WANT THIS ITEM ADDED TO A PRODUCT LAGARTO IS BUILDING FOR YOU, CHOOSE THIS PRODUCT INSTEAD.
These single cap rivets are made of steel, with nickel plating. Package of 1000 caps, 1000 posts.
I've been a leathercrafter for 12 years, and became very frustrated with Tandy leather Factory "rapid rivets" (the ones with a finished cap on one end and an unfinished tube on the other). First, they stopped pinching the tubes, so the caps fall off far too easily before setting. Then, they reduced the quantity they sell to bags of 100. Since I was going through 1000+ of these a month, I sourced my own direct from a manufacturer.
Nickel plated steel Single Cap Rapid Rivets functionally identical (and actually improved) to those sold by Tandy Leather Factory Item #1275-12 in their "LARGE" length. Fits Tandy press and dies with the medium size rivet cups, or hand setters. For best results, use the press, as hand setting long rivets through material thinner than 9mm or 3/8" will often cause them to mis-set and bend the posts to one side.
I buy these in bulk (100,000 sets) and repackage them by weight, not quantity. You'll receive 1000 minimum pieces of each caps and posts, as I add a few extra grams to the bundles to be sure. I have used these same parts for my own leathercraft in a Tandy press, they work better than Tandy's if not the same.
Your rivets will come packaged exactly as you see in the photo - heavy 4mil bag with an internal zipper bag to keep the caps separate from the posts.
If you are not 100% satisfied with the quality of these rivets, you may return them for a full refund, even if you have used up to 50 sets. Shipping charges, however, will not be refunded.
1000 sets Single Cap Rapid Rivets with 9mm caps, 12mm posts
- Product Code: 1000 SCRR
- Availability: In Stock
-
$60.00