PLEASE NOTE: THIS PRODUCT IS FOR INSTALLERS ONLY. IF YOU WANT THIS ITEM ADDED TO A PRODUCT LAGARTO IS BUILDING FOR YOU, CHOOSE THIS PRODUCT INSTEAD.

You will receive two 304 stainless steel metric M4 0.7mm thread pattern philips head screws for each post, one is 8mm (5/16") and the other is 10mm (3/8"). Use the screw appropriate to the thickness of the material. Thinner materials will use the shorter screw. The longer screw bottoms out and leaves part of the thread exposed. Use the longer screw on material over 1/8" thick, if it does not compress much. Both screws are tapered head so they sit flush in soft material. You also get a tiny 304 stainless steel M4 washer in case your material has an issue with stretch - so it won't pull the screw thread through the material. This is an optional piece of hardware you can use or discard. If you need a different screw type, your local Ace Hardware has these in open stock bins, and you can buy a 10 cent screw of exactly the right length and head type for your specific needs. Buy metric M4 0.7mm thread pitch to match the post.

Dimensions (fractional inches)
post width 15/64"
post height (overall) 1/2"
post height (usable) 1/4"
flare width 7/16"
hole width 5/32"
maximum padlock shackle size 1/8"
leather hole size for post 1/4"


Dimensions (metric)
post width 5.85mm
post height (overall) 13.2mm
post height (usable) 6.35mm
flare width 10.9mm
hole width 3.85mm
maximum padlock shackle size 3.75mm
leather hole size for post 6.35mm


If I don't have enough to fulfill your order (usually I keep 50+ on hand), there will be a slight delay as I resupply. If you order more than I have, I will ask you about the shipping time frame being acceptable before charging your card.